VHT NITE SHADES is a unique transparent black taillight
lens coating for creating that custom European styling. When applied to
taillights, fog lights or turning indicators, VHT NITE SHADES appears black
until they are lit, then the natural red re-appears. Customize lenses for only a
fraction of the cost of expensive conversion kits.
How to:
Clean surface with a window or glass cleaner. Shake can
for one minute after the ball in the can begins to rattle. Agitate can well.
Shake for one minute after marble is heard. Hold can 12 inches away from the
lens. Apply in a crosshatch motion, be sure to spray past the lens so that the
corners and ends are evenly covered. Apply subsequent coats approximately 10
minutes apart, usually two or three coats will achieve desired look. VHT NITE
SHADES should be dry to the touch in about an hour and completely dry overnight.
Do not reinstall until coating is completely dry. Apply VHT NITE SHADES to the
outside of the lens cover only. Remove lens cover from the vehicle before
applying. VHT NITE SHADES is a transparent coating, apply in smooth, even
strokes approximately 3 minutes apart. Apply thin coats until a desired darkness
is achieved usually two or three coats is sufficient.
*For off road use only*
